LevelDatic 80S collects and measures level or draught data from hydrostatic pressure using electro-pneumatic technology.

Two main methods are used to measure hydrostatic pressure:

• „  Bubbling air fed to tank — used where bubbling air can be fed into the tanks, such as ballast, diesel oil, heavy fuel oil tanks and draught measurement.
• „  Pneumatic 1:1 pressure converter — used where air fed into the tanks is prohibited, such as in drinking water tanks and tanks with liquid ash point less than 60o C.10 electro-pneumatic channels can be connected to each cabinet and additional cabinets can be added to t the vessel’s requirement. A unique feature is the constant ow speed controller allowing adjusting and monitoring of air ow and fast access for testing and purging. Another useful feature is that each channel has a built in non-return valve in the pneumatic block located in the cabinet.

• LevelDatic WIM is designed for monitoring and detection of water ingress in cargo holds, empty ballast tanks and voids. The system includes alarm panel with all the required alarms and also shows actual level of water.

  Decision Support Flooding Control (DFC) is a solution developed in cooperation with Onboard Napa Oy. This solution uses online information integrated with an intelligent 3D calculation tool for the best reliable decision support in case of Flooding .

  PDS LevelDatic 80S

  PMT16C Sensor End Of Life

  CONSTANT FLOW SPEED CONTROLLER

  LD80S Part numbers

  LEVELDATIC LD80S ELECTRO-PNEUMATIC SYSTEM

   

  10.175SP	LD 80/100/120 Pressure sensor tube
  20.005SP	LD 80/100/120 Constant flowspeed quick connector
  20.021SP	LD 80/100/120 Pneumatic valve turngrip
  20.102SP	LD 80/100/120 Pressure reducing valve
  20.103SP	LD 80/100/120 Constant flowspeed controller
  20.104SP	LD 80/100/120 Constant flowspeed flow meter
  20.105SP	LD 80/100/120 pneumatic units membrane
  20.110SP	LD 80/100/120 Pneumatic unit, complete, 10 channel
  20.112SP	LD 80/100/120 Pneumatic unit bottom gasket
  20.120SP	LD 80/100/120 Constant flowspeed valve assy
  20.121SP	LD 80/100/120 Pressure reducing valve press. switch
  20.122SP	LD 80/100/120 Pressure reducing valve pressure met
  20.124SP	LD 80/100/120 Purge hose assy
  20.125SP	LD 80/100/120 Constant flowspeed controller inst s
  20.126SP	LD 80/100/120 Pressure reducing valve inst set
  20.127SP	LD 80/100/120 Constant flowspeed adjustment device
  20.129SP	LD 80/100/120 Pressure reducing overhaul kit
  20.130SP	LD 80/100/120 Pressure reducing  membrane kit
  20.131SP	LD 80/100/120 Constant flowspeed overhaul kit
  20.132SP	LD 80/100/120 Constant flowspeed membrane kit
  20.551SP	LD 80/100/120 Valve block, measuring points 1-5
  20.552SP	LD 80/100/120 Valve block, measuring points 6-10
  20.801.02SP	LD 80 Pressure sensor, 0-0.2 bar
  20.801.05SP	LD 80 Pressure sensor, 0-0.5 bar
  20.801.1SP	LD 80 Pressure sensor, 0-1 bar
  20.801.2SP	LD 80 Pressure sensor, 0-2 bar
  20.801.3SP	LD 80 Pressure sensor, 0-3 bar
  20.801.4SP	LD 80 Pressure sensor, 0-4 bar
  20.808SP	LD 80 PUA-41 Power supply
  20.810SP	LD 80 PUA-42 Power supply
  20.811SP	LD 80 Standard spare part set
  20.813SP	LD 80S Large standby spare part set
  20.820SP	LD 80 SCB-41 Sensor connecting board
  20.825SP	LD 80 Pressure switch to SCB-41 cable
  KIT-1037SP	LD 80/100/120 Constant flowspeed o-ring kit, 5 cha