Product Description

Damcos / Danfoss UPS KIN-1000AP 100V/110V/120 +/- 25%; 220V/230V/240V +/-25%.

Part # G241-1502

 

1239937_6

AC INPUT
AC Input Capacity on Battery 1000VA
AC Input Voltage 100V/110V/120 +/- 25%; 220V/230V/240V +/-25%
AC Input Frequency 50 or 60 Hz+/-10% (auto sensing)

OUTPUT
Output Voltage On Battery 100V/110/120V +/- 5%; 220V/230V/240V +/- 5%

AC OUTPUT
AC Output Voltage Simulated sine ware
AC Output Frequency 50 or 60 Hz +/- 0.5%
AC Output Voltage Regulation AVR automatically increase output voltage 15% above input voltage if -9% to -25% of nominal. AVR decrease output voltage 13% below input voltage if +9% to +25% of nominal
AC Output Transfer 2/4 milliseconds, including detection time

PROTECTION
Protection Spike 320 Joules, 2ms
Protection EMI/RFI 10dB at 0.15 MHz, 50 dB at 30 MHz
Protection Overload UPS automatic shutdown if overload exceeds 110% nominal at 60 sec and 130% at 3 sec
Protection Unit Fuse for overload & short circuit protection
Protection 10 BaseT Network (UTP, RJ-45) compatible jacks
Protection Short Protection UPS output cut off immediately or input fuse protection

BATTERY
Battery Type Sealed, Maintenance-free lead acid, with 3 – 6 years typical lifetime
Battery Typical 4 hours (to 90% of full capacity)
Battery Protection Automatic self-test & discharge protection, replace battery indicator

BACKUP TIME
Battery Backup Time Full Load 7 minutes
Battery Backup Time Half Load 15 minutes

PHYSICAL
Physical Weight kgs Tower 15
Physical Weight lbs Tower (33lb)
Physical Dimension mm Tower 130x382x200
Physical Dimension inch Tower 5.1x15x7.9

INDICATOR
LED LED

ALARM
Alarm Battery Backup Slow beeping sound (about 0.47 Hz)
Alarm Battery Low Rapid beeping sound (about 1.82Hz)
Alarm Overload Continue beeping sound

INTERFACE
Interface RS-232 Bi-directional communication port

ENVIRONMENT
Environment Ambient 3,500 meters max. elevation, 0-95% humidity non-condensing, 0-40 deg c
Environment Audible <40dBA (1 meter from surface)